Testimonials

Hi Dominik,

Custom Twin Stainless Davits

I just wanted to say THANK YOU so much for our BEAUTIFUL davits. They are INCREDIBLE and we wouldn't have them without you and your willingness to sponsor and work with us. Honestly, your company is the best and we appreciate all the hard work you guys did for us (because I know it required a little more work than you thought). Anyway, I wrote a blog post about our new davits and UMT. You can see it here. Thanks for Everything. We love, love, LOVE our new davits. Merry Christmas and Happy New Year to the whole crew of UMT!!! You guys REALLY are the BEST!

Best,

Brittany

Scott & Brittany Meyers

s/v Asante

1988 Brewer 44

 


 

Dear UMT,

SatoriIt is hard to believe that over ten years ago, I first engaged UMT and met you installing chocks for my 9 foot dinghy aboard my then new 40 foot sedan bridge. A few months later you installed a shore cablemaster where others said it could not be done. Five years later UMT assisted me in customizing my one of kind 58 foot Horizon Motor yacht. UMT custom fabricated arched stainless steel stanchions supported the aft flybridge where UMT manufactured and installed a 1000 pound davit for my then new 12 foot RIB. Just last year, UMT custom made two removable chocks for my new 14 foot RIB aboard my new 74 Horizon Mortor Yacht. Early this year, UMT designed and installed a boarding ladder aboard earning us compliments at every marina we visit from owners and crews of neighboring vessels. In fact, the UMT makes the standard boarding look like an afterthought on yachts almost twice our size.

It has been a great experience dealing with UMT. I appreciate your dedication to insure my satisfaction both a time of installation and even years later. After all, loyalty is a two way street.

Best regards, Ira
m/v Satori
Miami, Florida

 

 


 

Dear UMT,

Motor Yacht KataraTestimonial From Alistair Reid Chief Officer Motor Yacht Katara.

UMT carried out multiple projects for Katara whilst in Ft Lauderdale and they all surpassed my expectations. I can happily say that I would never hesitate to use their friendly, timely and professional services again. UMT in my mind are the best metal fabrication company I have dealt with.

Best Regards,

Alistair Reid
Chief Officer

 


 

Bryan J. LoganAs a business owner for more than 25 years, I know first-hand the importance of client satisfaction -- not just occasionally, but everyday. The UMT team has mastered this vital business requirement. They listen, ask key questions, innovate, and deliver what they promise on time.

UMT has established over the past decade an amazingly talented team who produce custom products to a quality that in my opinion is impossible to find anywhere else in the marine industry.

Over the past 18 months I have asked UMT to design and fabricate arrange of six large and small projects for my sailboat. All of these complex projects have required extensive design innovation by the UMT team. Not only have they come forward with smart and practical design, but they also listened to my requirements and ideas and incorporated them into the final products.

In addition when problems arise, as they always do with custom design/build projects, there is no argument or finger pointing. The UMT teams' ONLY focus is on what they need to do to overcome the issue and move forward. What a refreshing approach in this day and age.
In conclusion I can only say: When it comes to custom crafted projects for my sailboat there is only one number in my contact list – UMT Marine (954) 316 0327

UMT will build you what you need when you need it to an unsurpassed quality, and do it with a smile.

Bryan J. Logan
Rula Bula

 

 


 

I'm a dealer in Annapolis MD and have bought a lot of Chocks for Novurania, and the UMT chocks are top notch! UMT is always available when we install if I have any questions.

Jim Dean


 

The only marine steel fabricator that I will use for my boat is UMT. They have tackled and performed great on several very simple and several very complex projects. They have designed and installed toothbrush/razor holders -- simple. They have designed and installed a 24' wide arch for my catamaran to support two wind generators.
UMT's designers are expert in their field and they have the patience required to modify/revise/modify/revise the plans, the prototypes, and the final product.
What more can a person ask for.

Alan Goldberg


 

UMT Marine has done extensive work in the complete refit of my 49' Grand Banks "Five Star"
Some of the work included dingy lift and chocks for dingy, complete redo of the mast, custom boarding gangway, etc. UMT is not just trying to sell you something, but truly committed to find the correct solution for your problem. They do not just manufacture the item for you. It took him many tries to get the lettering on our gangway to suit HIS standards, we would have never know the difference. I am an engineer by education and they far exceeded by very demanding requirements. Highest recommendation!!!!! "Five Star service". Please e mail for further information.

Leonard Borger - Owner
"Five Star"
This email address is being protected from spambots. You need JavaScript enabled to view it.


 

Mike - we are now at West End in the Bahamas after a most successful maiden voyage on our Nordhavn 6301 "Silver Spray". The tender has been off and on several times since the chocks were installed - they are a perfect fit and hold the boat without any wobbling or other alignment issues. We also encountered some decent seas crossing the Stream and were mighty glad of the wire tiedowns and the knowledge that they are thru now securely bolted through the foredeck.

I want to thank you personally for your attention on this project and especially your sense of urgency when we discovered that not all of the fasteners were thru bolted. Your immediate reaction was very straightforward and memorable . . . "You don't want your tender coming through your pilothouse windows - do you?" John Hoffman at Nordhavn was also impressed with your desire to put things right without question and with immediate effect.

Before engaging with UMT I had heard that it was a first class organization. I now know that for a fact and will seek you out for any stainless work I need done in the future.

Best RegardsNigel Macleod

p.s. thanks for the t-shirts!


 

Motor Yacht KataraDear Dominik,

I really want to thank you and the UMT team for the excellent work you have done on my vessel. I was recommended to you by my neighbor in the marina who you also performed great work for. The pre-sale and quoting process was quick and you visited the site 24 hours later. I was impressed with your team when visiting your shop. The two technicians that you sent for the installation were very nice and polite and really knew their job. They arrived on time and did a mint job. Really extraordinary.

I received other quotes from your competitors and I am very glad I choose UMT Marine.

Manual R. Manotas G
Miami, Florida